background image

Administration and Accounting

WorkCentre

®

 5945/5955

674

User Guide

10. Select the 

Close

 button.

More Information

Viewing Billing Information using the Machine Status Menu

System Administrator Guide 

www.xerox.com/support.

Using Internet Services to find System Administrator Contact Details
Changing the Billing Impression Mode in Internet Services

Installing Optional Services using the Tools Menu

You can use the Tools menu to adjust the brightness of the Control Panel display, change the billing 
impression mode or enable an optional feature on your device. 

Use the Feature Installation screen to install optional services on your device, for example the XPS 
(XML Paper Specification) feature, which enables the device to print XML Paper Specification files.

Use the Software Activation Portal (SWAP) to obtain a Feature Installation Key.

Feature Installation Keys are used to install optional services on the device. When you purchase an 
optional service you will receive a kit which contains an activation key. Enter the activation key and 
your machine serial number on the SWAP website to receive a Feature Installation Key.

To obtain the kit for an optional service you want to install please refer to your Xerox Representative.

Refer to the System Administrator Guide for further information.

1. Press 

the 

Machine Status

 button on the Control Panel.

2. Select 

the 

Tools

 tab on the touch screen.

3. Select 

the 

Device Settings

 button.

4. Select 

the 

General

 button.

5. Select 

the 

Feature Installation

 button.

6.  Use the touch screen keyboard to enter the Feature Key.

7. Select 

the 

OK

 button.

More Information
System Administrator Guide 

www.xerox.com/support.

Using Internet Services to find System Administrator Contact Details
Using the Software Activation Portal (SWAP) to obtain a Feature Installation Key

Adjusting the Display Brightness using the Tools Menu

You can use the Tools menu to adjust the brightness of the Control Panel display, change the billing 
impression mode or enable an optional feature on your device. 

Use the Display / Brightness option to adjust the brightness of the touch screen to suit the ambient 
light levels.

1. Press 

the 

Machine Status

 button on the Control Panel.

2. Select 

the 

Tools

 tab on the touch screen.

3. Select 

the 

Device Settings

 button.

Summary of Contents for WorkCentre 5945



















































































































































































































































































































































































































































































































































































































































































































































Reviews: