Xerox WorkCentre 5945 User'S Manual And Warranty Download

Page: 138 / 722

Fax

WorkCentre

5945/5955

136

User Guide

15. Press the

Job Status

button on the device control panel to view the job list and check the status

of the job.

More Information

Creating a New Fax Address Book Contact (Embedded Fax)
Using Dialing Characters in a Fax number (Embedded Fax)
Sending a Fax to a Number Saved as a Favorite (Embedded Fax)
Using a User ID to Log In at the Device
Explaining the Fax Options
Creating a Fax Address using Internet Services
Using Internet Services to find System Administrator Contact Details

System Administrator Guide

www.xerox.com/support.

Address Book

Creating a New Fax Address Book Contact (Embedded Fax)

Use the Fax (Embedded Fax) service to scan your documents and send them to most types of fax
machines that are connected to the telephone network.

Note:

This option must be made available by your System Administrator.

If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the Fax features.

Create New Contact will allow you to add a contact to the Address Book, the contact will be stored
and is accessible from the Address Book.

Note:

This option must be made available by your System Administrator.

1. Press

the

Clear All

button on the control panel to cancel any previous programming selections.

2. Press

the

Services Home

button.

3. Select

the

Fax

button on the touch screen.

4. If required, select the

Fax

tab. This is usually the active tab when the Fax service opens.

5. Select

the

Enter Fax Number entry box

and use the numeric keypad, or the touch screen

keypad to enter the recipient’s fax number.

6. Select

the

Address Book with a plus sign

button.

7. Select

the

Create New Contact

button.

8. Select

the

Information

button.

9. Select the empty field you want to edit.

10. Use the touch screen keyboard to enter the details.

11. Select the

button.

12. Select the fields you want to edit and use the touch screen keyboard to enter the details.

•

Field next to Email icon will allow you to enter an E-Mail address.

•

Field next to Phone icon with green background will allow you to enter an Fax number.

•

Field next to Phone icon with earth background will allow you to enter an Internet Fax
address.

13. Select the

button.

14. Select the star icon on the right of a field to add that contact detail to the favorites.

15. Select the

button.

Summary of Contents for WorkCentre 5945


















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WorkCentre 5945

Reviews:

Related manuals for WorkCentre 5945

Brands by name

Popular brands

Xerox WorkCentre 5945, User'S Manual And Warranty

Search results

Summary of Contents for WorkCentre 5945

Reviews:

Related manuals for WorkCentre 5945

Brands by name

Popular brands