Installation and Setup
54
Xerox
®
WorkCentre
®
6025 Multifunction Printer
User Guide
To configure the Host Access List:
1.
At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press
Enter
or
Return
.
2.
In CentreWare Internet Services, click
Properties
.
3.
In the Properties pane, to expand the menu, click the plus (
+
) symbol next to the Security folder.
4.
Click
Host Access List
.
5.
In the IP Address field, enter the IP address of the host as X.X. X.X, where X is a number from 0
through 255. For example, 192.168.200.10.
6.
In the Address Mask field, enter the network mask for the host as X.X. X.X, where X is a number from
0 through 255. For example, 255.255.255.255.
7.
For the action the host takes with the IP address, for Active mode, select an option.
−
Off
: You can use this setting to make a row of the access list inactive. Use this setting to enter a
specific IP address or range of addresses before you apply Accept or Reject mode.
−
Accept
: You can use this setting to allow the specified IP address or range of addresses access
to the printer.
−
Reject
: You can use this setting to deny the specified IP address or range of addresses access
to the printer.
8.
Click
Save Changes
.
