Installation and Setup
90
Xerox
®
WorkCentre
®
6605 Color Multifunction Printer
User Guide
Configuring Xerox Secure Access Settings
When Xerox Secure Access is enabled, users swipe a pre-programmed identification card through a
proximity card reader at the control panel. To use this method, purchase and install a USB card reader
and an authentication server that supports the Convenience Authentication API.
For recommended authentication servers and supported USB card readers, see
www.xerox.com/office/WC6605support
.
To configure Xerox Secure Access Settings:
1.
At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press
Enter
or
Return
.
2.
In CentreWare Internet Services, click
Properties
>
Security
.
3.
Click
Xerox Secure Access Settings
.
Note:
When you register the printer, most authentication servers automatically configure the Xerox
Secure Access Server setting. If prompted to set these fields manually, you can set the IP
Address/Host Name and Path fields as specified in your authentication server documentation.
4.
For IP Address/Host Name and Port, type the appropriately formatted address and port number.
5.
For Path, type the HTTP path that your authentication server provides.
6.
Enter additional information as needed.
−
Connection Time-Out
: This option sets the length of time the printer waits for a response from
the server before it cancels the operation.
−
Alternate Login
: When an authentication server enables the feature, this setting provides an
option for the user to enter login credentials using a keyboard.
−
Default Title
and
Default Prompt
: These fields set the instructional text that appears when
the user attempts to enter a locked service.
7.
For USB Card Reader, choose a detection policy.
8.
Click
Save Changes
.
Configuring LDAP Authentication
1.
At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press
Enter
or
Return
.
2.
In CentreWare Internet Services, click
Properties
.
3.
In the Properties pane, to expand the menu, click the plus (
+
) symbol next to the Security folder.
4.
Click
LDAP Authentication
.
5.
To use a text string to add to the user name, next to Use Added Text String, select
Enable
.
6.
Next to
Text String Added to User Name
, enter the text string to add to the user name for
authentication.
7.
Click
Save Changes
.
