Configuration de la fonction Numérisation réseau (en option)
Copyright © 2007, Xerox Corporation. Tous droits réservés.
11
Procédures de configuration d'un espace d'archivage et de création d'un
modèle
Il est possible de créer des modèles à l'aide des Services Internet CentreWare ou du logiciel
SMARTsend exécuté sur un serveur de modèles distant. Pour créer et configurer un modèle
avec les Services Internet, suivre les étapes ci-dessous.
1.
Sur le poste de travail, ouvrir le navigateur Web et entrer l'adresse IP de la machine
dans le champ
Adresse
ou
Emplacement
. Appuyer sur
Entrer
.
2.
Sélectionner l'onglet
Propriétés
.
3.
Sélectionner le dossier
Services
.
4.
Sélectionner le dossier
Numérisation réseau
.
5.
Sélectionner
Configuration de l'espace d'archivage des fichiers
.
6.
Sélectionner
Modifier
pour
Destination fichier par défaut
.
7.
Entrer les informations appropriées, y compris un nom pour l'espace d'archivage,
l'adresse ou le nom d'hôte du serveur de destination, le chemin du document et un nom
de connexion/mot de passe si nécessaire. Noter que si le nom de connexion
« anonyme » est spécifié, un mot de passe doit également être spécifié.
8.
Sélectionner
Appliquer
pour enregistrer les modifications ou
Défaire
pour quitter sans
enregistrer les modifications. Si
Appliquer
a été sélectionné, il peut être nécessaire
d'entrer le nom d'utilisateur (11111, par défaut) et le mot de passe (x-admin, par défaut)
administrateur.
9.
Cliquer sur l'onglet
Numérisation
en haut de l'écran Services Internet CentreWare pour
créer un nouveau modèle.
10.
Spécifier le nom du nouveau modèle dans le champ
Nom du modèle
et remplir les
champs
Description
et
Propriétaire
si nécessaire.
11.
Sélectionner
Ajouter
pour créer le nouveau modèle.
12.
Sélectionner
Modifier
pour
Destinations des fichiers
.
13.
Sélectionner une méthode d'archivage dans la liste déroulante. Il est néanmoins
possible d'accepter la méthode par défaut (Nom automatique).
14.
Pour
Destination du fichier
, la destination affichée doit correspondre aux informations
entrées précédemment lors de la configuration de l'espace d'archivage de numérisation.
S'il existe plusieurs espaces d'archivage, il est possible d'en choisir un dans la liste
déroulante.
15.
Sélectionner
Appliquer
pour enregistrer les modifications ou
Défaire
pour quitter sans
enregistrer les modifications. Si
Appliquer
a été sélectionné, il peut être nécessaire
d'entrer le nom d'utilisateur (11111, par défaut) et le mot de passe (x-admin, par défaut)
administrateur.