Quick Network Setup (Static IP)
Xerox WorkCentre M123/M128/133
Xerox WorkCentre Pro 123/128/133
4
8.
The DNS setting must be entered through CentreWare Internet Services. From a workstation, open a web
browser (such as Internet Explorer), and then enter the IP address in the format
http://xxx.xxx.xxx.xxx
(the xxx’s represent the device IP address). If connected properly, you should see a CentreWare Internet
Services web page for your device.
Note
CentreWare Internet Services is a powerful tool for configuring the WorkCentre device remotely.
The default user name is
11111
and the password is
x-admin
. The user name and password are
case-sensitive and should be changed after install.
9.
The Default Gateway, Subnet Mask, and DNS address settings can be entered via CentreWare
Internet Services if the device is on the same subnet as the workstation. To access them via CentreWare
Internet Services:
a.
Click the
Properties
tab
b.
Click the
Protocols Settings
folder.
c.
Click
TCP/IP
.
10.
Load the print drivers on the workstations that will be accessing the device.
Note
For more detailed instructions, see the
System Administrator Guide
.
