1
Safety Notes
Your copier and supplies have been designed and tested to meet strict
safety requirements. These include safety agency examination and
approval, and compliance to established environmental standards. Please
read the following instructions carefully before operating the copier and
refer to them as needed to ensure the continued safe operation of your
copier.
Follow all warnings and instructions marked on or supplied with the
product.
Symbology:
= High Voltage,
= Heated Surface.
Unplug this copier from the wall outlet before cleaning. Always use
materials specifically designated for this copier. Use of other materials
may result in poor performance and could create a hazardous situation.
Do not use aerosol cleaners. Follow the instructions in this User Guide for
proper cleaning methods.
Never use supplies or cleaning materials for purposes other than what
they were intended. Keep all supplies and materials out of reach of
children.
Do not use this copier near water, wet locations, or outdoors.
Do not place this copier on an unstable cart, stand, or table. The copier
may fall, causing personal injury or serious damage to the copier.
This product is equipped with a 3-wire grounding type plug (e.g., a plug
having a third grounding pin). This plug will fit only into a grounding-type
power outlet. This is a safety feature. To avoid risk of electric shock,
contact your electrician to replace the receptacle if you are unable to insert
the plug into the outlet. Never use a grounding adapter plug to connect
the copier to a power source receptacle that lacks a ground connection
terminal.
This copier should be operated from the type of power source indicated
on the marking label. If you are not sure of the type of power available,
consult your local power company.
Summary of Contents for XC356 - Home Office Copier
Page 1: ...XC353 355 356...
Page 38: ......
