Installation
14
Xerox© LCD Monitor User’s Manual
Method 2: Digital (DVI) Connection
1
Turn off the computer and unplug the power cable.
2
Connect the
DVI
signal cable to the DVI port on the back of
the computer.
3
Connect the audio cable to the
out
port on the back of the
computer.
4
Connect the power cord to the LCD monitor and wall outlet.
5
Press the button, located on the bottom side of the main
unit to turn the monitor on, then turn the computer on. If the
monitor displays an image, the monitor is successfully
installed. If no image is displayed, check all connections.
6
When the DVI and VGA input ports are connected at the
same time, press down the AUTO button
for
3 seconds to
switch between the VGA mode and DVI mode.
Connect to power source
4
2
Connect to the DVI port
Connect to the
out
port
3
2
D-SUB
2 D-SUB
+
1 DVI
