M a n u a l I n s t a l l a t i o n P r o c e d u r e
5-34
❖
X N I C - E N E T / T R I N G C o n f i g u r a t i o n G u i d e
7
Install the printer into the System V spooler system. Before
shutting down the spooling system, check to see that there
are no print jobs running (enter:
l p s t a t
- o
p r i n t e r _ n a m e
).
If jobs are running, wait until they are completed. Then,
enter the following:
/ u s r / l i b / l p s h u t
/ u s r / l i b / l p a d m i n - p x r x _ p c l
- v / d e v / n u l l
- i / u s r / x r x / l p _ x r x _ p c l
/ u s r / l i b / l p s c h e d
/ u s r / l i b / a c c e p t x r x _ p c l
e n a b l e x r x _ p c l
8
To make the printer the default system printer, enter:
/ u s r / l i b / l p a d m i n - d x r x _ p c l
9
Test the printer spooler operation by entering:
l p - d x r x _ p c l t e s t . d a t
If the host is configured correctly, a banner page and the
contents of the
test.dat
file will be printed.
If the test fails, check to see if the printer is in proper
emulation mode, or refer to your UNIX system administration
manual for information on printer spooler operation.
Etr-ch05 Page 34 Thursday, October 24, 1996 7:31 PM
