C o n n e c t i n g t h e X N I C
C h a p t e r 2 : C o n n e c t i n g t h e X N I C
❖
2-3
Connecting
XNIC-ENET to
the Network
The XNIC-ENET may be connected to your network using
Thinnet (10base2) cable with a BNC connector, or UTP
(Unshielded Twisted Pair, 10baseT) cable with an RJ-45
connector. Figure 2.1 shows the location of the ports on the
XNIC-ENET.
Figure 2.1 XNIC-ENET Connection Panel
Caution
Never connect network cables to both the BNC and UTP ports
on the XNIC-ENET at the same time.
If you are connecting to an active Ethernet network, the
connection must be performed quickly to avoid interrupting
the network for a long period.
Etr-ch02 Page 3 Thursday, October 24, 1996 4:49 PM
