C o n f i g u r i n g L A N S e r v e r f o r T C P / I P o r N e t B I O S
C h a p t e r 8 : U s i n g t h e P r i n t e r w i t h L A N S e r v e r
❖
8-9
Creating a Print
Queue on the
File Server
3
Enter the following at the command prompt in the OS/2
window:
a : \ L A N s v r \ i n s t a l l
This displays the
Installation Screen
.
4
Click the
Install LAN Server
button.
The Install program will create the Xerox LAN Server Utility
folder.
5
A completion message will appear when the installation is
finished.
6
Click on
OK
.
If you would like to see a list of the files that were
installed on your hard disk, refer to the Readme icon in
the Xerox LAN Server Printer Utility folder.
7
Remove the diskette from the floppy drive.
You are now ready to create print queues on the file server
which is discussed in the next section.
1
Install the Xerox OS/2 driver (for PCL or PostScript) shipped
with your printer. This is done via the OS/2 Print Manager.
2
Double click on the
Xerox LAN Server Printer Utility
folder on
the
LAN Server
desktop.
This displays the
LAN Server Printer Utility - Icon View
window.
ETR-CH08 Page 9 Wednesday, October 23, 1996 9:46 PM
