C o n f i g u r i n g L A N S e r v e r f o r T C P / I P o r N e t B I O S
C h a p t e r 8 : U s i n g t h e P r i n t e r w i t h L A N S e r v e r
❖
8-15
4
Select a printer Driver.
The Xerox OS/2 driver that you installed earlier should
appear in this field.
Select the Xerox OS/2 driver for your printer.
To add additional drivers to the Xerox LAN Server
Printer Utility driver list, install a new printer under the
OS/2 Print Manager and select the desired driver for
the new printer.
5
Enter the Server Name.
This is the XNIC Server Name (XNE
xxxxxx
for XNIC-ENET
or XNT
xxxxxx
for XNIC-TRING).
Refer to
Before Installation
(page 8-8)
where you wrote this
earlier.
6
Enter the
Service
Name.
This is the XNIC Printer Name (XNE
xxxxxx_
1 for
XNIC-ENET or XNT
xxxxxx_
1
for XNIC-TRING).
Refer to
Before Installation
(page 8-8) where you wrote this
earlier.
ETR-CH08 Page 15 Wednesday, October 23, 1996 9:46 PM
