C o n n e c t i n g X N I C - T R I N G t o t h e N e t w o r k
C h a p t e r 2 : C o n n e c t i n g t h e X N I C
❖
2-7
UTP (RJ-45)
Connection
STP (DB-9)
Connection
1
Attach one end of the twisted-pair cable
to the UTP port on the XNIC-TRING,
using a standard RJ-45 connector.
2
Attach the other end of the cable to a
Token Ring MAU with the correct speed.
Do not attach anything to the port
marked STP.
1
Attach the DB-9 end cable to the STP port
on the XNIC-TRING.
2
Attach the other end of the cable to a
Token Ring MAU with the correct speed.
Do not attach anything to the port
marked UTP.
Etr-ch02 Page 7 Thursday, October 24, 1996 4:49 PM
