W i n d o w s N T P r o b l e m s
C h a p t e r 1 1 : T r o u b l e s h o o t i n g
❖
11-27
A General Protection
error occurs in
CorelDraw! when
printing (continued).
CorelDraw! does not accept the
string of the Printer Port as
PASSTHRU (continued).
For example, to configure a text printer
named 4517 on physical port 1 using
TCP Port 3001, type:
CHANGE SERVICE 4517 3001 FILTER
ENABLED TELNET DISABLED PORT 1
Note: The above command is typed all
on one line; do not type a <cr> until all
information (shown on two lines above)
is entered.
Note: The TCP Port specified (3001) is
required mainly for syntactical purposes
to define a new TCP/IP service. The LPD
protocol will still use TCP Port 515.
However, any print jobs sent to TCP
Port 3001 will also utilize the 4517
service and be directed to physical
port 1.
5. Log out of the XNIC telnet session by
entering logout.
6. Create a new printer from the Program
Manager. In Step 10, the new input for
B will be the new Queue Name (e.g.,
4517).
Table 11.6 Windows NT Problems
(continued)
Problem
Possible Causes
Corrective Actions
ETR-CH11 Page 27 Thursday, October 24, 1996 7:14 AM
