B-4
❖
X N I C - E N E T / T R I N G C o n f i g u r a t i o n G u i d e
Initial
Installation
Choose
Network Printing
(below),
Parallel Port Printing
(page B-8), or both.
Network
Printing
From a Local Floppy Device
1
Decide where you want to store the Xerox Installation Files
on the hard disk of your workstation and create a directory.
Change to the directory you just created.
2
Insert the UNIX Installation Utility diskette that is shipped
with the XNIC into the floppy drive and enter the following
at the command line to begin the installation:
# /etc/init.d/volmgt
stop
(only on Solaris Systems)
# tar xvf /dev/fd0 ./xrx
(this will extract the
installation files)
# cd ./xrx
# ./enstall -s
(this will start the
installation program)
3
When the program asks you to enter the number
corresponding to your system, enter the number that relates
to the selection for SunOS or Solaris.
4
When asked to enter the device full path and file
specification of your distribution medium, enter the name of
your floppy device.
For example:
# /dev/fd0, /dev/rdiskette
(or whatever it may be)
5
When asked to which LAN Interface the Xerox servers will
be connected, enter either your Ethernet or Token Ring
device name.
For example:
le0, tr0, hme0
(or whatever is on your
system)
ETR-APPB Page 4 Thursday, October 24, 1996 7:51 AM
