C o n f i g u r i n g t h e X N I C a s a P r i n t S e r v e r ( N e t W a r e 2 . x / 3 . x )
C h a p t e r 3 : U s i n g t h e P r i n t e r w i t h N o v e l l N e t W a r e
❖
3-9
Adding the
Print Server
and Printer
These procedures use the commands for Novell NetWare 2.x
or 3.x. Unless noted, commands can be upper or lower case.
Typed commands should be entered by pressing the
< E n t e r >
key.
1
Log in to the Novell file server so that you have supervisor
privileges. At the prompt, enter:
L O G I N
f i l e s e r v e r \ S U P E R V I S O R
At the prompt, enter the password.
2
At the system prompt, enter:
P C O N S O L E
3
Select
Print Server Information
from the
Available
Options
menu.
To select an item from a menu in PCONSOLE, use the arrow
keys to highlight the item, then press
< E n t e r >
.
4
Press
< I n s e r t >
.
5
Enter the print server name as:
X N E
x x x x x x
(for XNIC-ENET)
or as:
X N T
x x x x x x
(for XNIC-TRING),
where
xxxxxx
is the last six characters of the XNIC hardware
address.
6
Select the
print server name you just defined.
7
Select
Print Server Configuration
from the menu.
8
Select
Printer Configuration
from the menu.
9
Select one of the
Not Installed
printers from the list of
printers displayed.
ETR-CH03 Page 9 Wednesday, October 23, 1996 6:46 PM
