U s i n g N W A d m i n
3-24
❖
X N I C - E N E T / T R I N G C o n f i g u r a t i o n G u i d e
Adding the Printer
4
Enter the Print Server name as:
X N E
x x x x x x
(for XNIC ENET)
or as:
X N T
x x x x x x
(for XNIC TRING)
where
xxxxxx
is the last six characters of the XNIC hardware
address
.
5
Click the
Create
button.
1
Use the right mouse button to click the context to which the
XNIC Print Server will be added.
2
Select
Create
from the displayed menu.
3
Select
the Printer
object
and click
OK
.
4
Enter the Printer name as:
X N E
x x x x x x _ 1
(for XNIC ENET)
or as:
X N T
x x x x x x _ 1
(for XNIC TRING)
The printer name is the print server name followed by an
underscore _ and a 1. Upper and lower case letters arent
important. For example, a valid name would be:
X N E
1 0 7 6 E 3 _ 1
or
X N T
8 8 E 8 2 9 _ 1
If the printer name has been changed using the DS/P
Utility, print the Printer Configuration Sheet to verify
the printers name.
5
Click the
Create
button.
ETR-CH03 Page 24 Wednesday, October 23, 1996 6:46 PM
