X N I C C o n f i g u r a t i o n O p t i o n s
3-48
❖
X N I C - E N E T / T R I N G C o n f i g u r a t i o n G u i d e
8. Setting the NDS
Tree
(Recommended
for Large
Networks)
The default is: No name.
If running in NetWare 4.x NDS in large networks (over 25 file
servers) it is recommended to set the XNIC with the NDS tree
name where the PServer object exists. This setting will
reduce the waiting time for the first job to print after the
printer is powered on.
Issue this command from TES to set the tree name in the
XNIC:
>define server netware nds
“tree_name”
Issue this command from TES to verify the tree name setting
on the XNIC:
>list server netware
Do not use the
show server netware
command for this
purpose.
ETR-CH03 Page 48 Wednesday, October 23, 1996 6:46 PM
