B a s i c X N I C C o m m a n d s
C h a p t e r 3 : U s i n g t h e P r i n t e r w i t h N o v e l l N e t W a r e
❖
3-57
Enable/disable Bindery Emulation or NDS
modes.
define server netware pserver
mode
(where
mode
is one of the following:
auto
Discovers through both NDS and bindery. This
is the default.
disabled
Disables PServer mode printing.
3.x
Only discovers through bindery.
4.x
Only discovers through NDS.)
Define a preferred or required NetWare file
server for the XNIC.
define node
server_name
nfserver
(where
server_name
is the Novell server name to be set as either
preferred or required)
Define the file server as required.
define server netware required enabled
The printers XNIC will only operate if the required file server is
available for connection. When the required file server is down,
the printers XNIC will not come up.
Define the file server as preferred.
define server netware required disabled
The printers XNIC will first try to connect to the preferred file
server. If it is down, the XNIC will connect to the first available file
server.
Specify the NDS context where PServer
object exists.
define server netware context
context_name
Enclose the
context_name
where the PServer object exists in
quotes. The default is no context. To clear, enter in its place.
Specify the NDS tree where PServer object
exists.
define server netware nds
tree_name
Enter the NDS
tree_name
where the printer server is located,
enclosed in quotes. The default is no NDS tree name. To clear,
enter in its place.
Disable the NetWare Forms feature.
define service netware forms disabled
The default is enabled
If the NetWare Forms on the file server is set to other than the
default value of 0 for your printer, it is recommended to disable
this feature on the XNIC for optimal operation.
Table 3.2 XNIC Tasks and Commands
(continued)
Task
Command
ETR-CH03 Page 57 Wednesday, October 23, 1996 6:46 PM
