13
wIoc=addr&om=1speed:000.0
, click the link,PDA shows you the map directly.
5.22 Tlimit function
The default Tlimit value is 0 meter, send SMS "tlimit123456 100" to change the limited
distance to 100 meters, which means when the tracker under the auto reporting mode
( for example, t030s***n123456 ), the tracker will not send any updated Geo-info if the
moving distance is less than 100 meters, it will send updated Geo-info only when the
moving distance is more than 100 meters.
P.S. You can change the tlimit value to 50-5999 meters by sending above command.
Send "tlimit123456 0" to remove this feature, after that, the tracker will report the
Geo-info according to preset interval and times.
5.23
GPRS setting
In order to use GPRS function, the user needs to set IP, Port and APN (access point
name ) by either cell phone, or our PC software.
5.23.1 Set an IP address and port:
Setup: Send SMS space+IP space+port.
If setup successful, the tracker will reply SMS adminip ok
Cancel: Send SMS no123456
5.23.2 Set APN
Setup: Send the following SMS to set up APN:
apn+pspace+the customer’s APN CONTENT
space+THE GPRS SIM CARD’S USER NAME
apspace+THE GPRS SIM CARD’S PASSWORD
If setup successful, the tracker will reply SMS “APN ok”.
