K021 Instructions v1.0
First Things
Page 3
X – 6 SQUARED ASSEMBLY INSTRUCTIONS
FIRST THINGS FIRST
A) ASSUMPTIONS These instructions assume several things:
1. You have at least some experience building R/C cars. These
instructions are not written for a first-timer.
2. You have the usual assortment of R/C tools.
If you do not meet both assumptions above, please contact us.
Contact information is on Page 4.
B) We suggest you have a clean, well-lighted work area.
C) Before threading screws or ball studs into plastic parts, tap the hole with a
4-40 tap.
D) All references to right and left are from the viewpoint of the driver sitting in
the car facing forward.
E) This Kit contains many parts; most are supplied by X Factory, others are
genuine Team Associated parts. A complete parts list is at the end of this
manual.
F) Many AE parts are supplied on “trees.” When you remove those parts from
the trees, we suggest you do so with a twisting motion to reduce flashing
on the parts, then dress the parts with a file prior to assembly.
G) To photograph this manual, we assembled the car several times. In some
photos, parts you have already assembled are “missing.” This was done
deliberately so you may clearly see this particular step. Follow the steps in
order and you’ll get to the end quickly.
