FusionServer 2488H V5 Server
Technical White Paper
5 Hardware Description
Issue 07 (2023-04-30)
Copyright © xFusion Digital Technologies Co., Ltd.
19
5.2.3 Ports
Port Positions
Figure 5-12
Ports on the rear panel
1
USB 3.0 port
2
LOM port
3
Management network port
4
Serial port
5
VGA port
6
PSU socket
Port Description
Table 5-4
Description of ports on the rear panel
Tool
Type
Quantity
Description
LOM port
10GE SFP+
and
1000BASE-T
4
10GE LOM service port
(optical) and GE service port
(electrical).
For details, see v.
VGA port
DB15
1
Used to connect a display
terminal, such as a monitor or
KVM.
Serial port
RJ45
1
Default operating system serial
port used for debugging. You
can also set it as the iBMC
serial port by using the iBMC
command.
NOTE
The port uses 3-wire serial
communication interface, and the
default baud rate is 115,200 bit/s.
Management
network port
1000BASE-T
1
Used for server management.
NOTE
The management network port is a
GE port that supports 100 Mbit/s
and 1000 Mbit/s auto-negotiation.
