background image

7

 Software and Hardware Compatibility

For details about the OS and hardware, see 

Compatibility Checker

.

NO TICE

● If incompatible components are used, the device may be abnormal. Such a fault is

beyond the scope of technical support and warranty.

● The performance of servers is closely related to application software, basic

middleware software, and hardware. The slight differences of the application
software, middleware basic software, and hardware may cause performance
inconsistency between the application layer and test software layer.

If the customer has requirements on the performance of specific application
software, contact technical support to apply for proof of concept (POC) tests
in the pre-sales phase to determine detailed software and hardware
configurations.

If the customer has requirements on hardware performance consistency,
specify the specific configuration requirements (for example, specific drive
models, RAID controller cards, or firmware versions) in the presales phase.

FusionServer 5288 V7 Server
Technical White Paper

7 Software and Hardware Compatibility

Issue 01 (2023-07-20)

Copyright © xFusion Digital Technologies Co., Ltd.

110

Summary of Contents for FusionServer 5288 V7

























































































































































Reviews: