FusionServer X6000 V6 Server
Technical White Paper
3 System Architecture
2021-07-16
16
Figure 3-3
X6000 V6 monitoring and management design
Server Nodes
The iBMC of each X6000 V6 server node provides an independent IP address for external
access. You can access the iBMC of any server node to manage an X6000 V6 server.
You can access the iBMC of a server node in the following ways:
⚫
Access the iBMC through the management network port of a server node. (You can
access iBMCs of the four server nodes through the management network port of any
server node.)
⚫
Access the iBMC of a server node through the direct connection management port.
⚫
Access the iBMC in NC-SI mode through the service network port of the NIC that
supports NC-SI.
The out-of-band management network cables are connected to a server node (the default
configuration on the BIOS menu). For details, see Figure 3-4.
Summary of Contents for X6000
Page 1: ......
