FusionServer X6000 V6 Server
Technical White Paper
2 Features
2021-07-16
8
2
Features
Ultra-High Density and Small Footprint
X6000 V6 servers provide higher density than conventional rack servers, reducing the
footprint in equipment rooms.
⚫
The X6000 V6 server provides computing density twice that of a conventional 1U rack
server and four times that of a conventional 2U rack server in the same cabinet space,
which greatly improves space utilization in equipment rooms.
⚫
The X6000 V6 server is 2U high and supports a maximum of four server nodes in two
configurations:
−
8 x 2.5" front SAS/SATA drives: Each server node supports 2 x 2.5" SAS/SATA
drives. The ventilation rate is optimized to meet heat dissipation requirements of
higher specifications.
−
24 x 2.5" front SAS/SATA/NVMe drives: Each server node supports 6 x 2.5"
SAS/SATA/NVMe drives in any mixed configuration ratio.
Unified Management and Easy Maintenance
X6000 V6 servers use high-density system architecture, and support maintenance in the cold
air area.
⚫
Server node management network port supports aggregated management, so that iBMCs
of each server node can work collaboratively to manage fans, PSUs, and other system
assets, combining the benefits of blade and rack servers. You can have out-of-band
management for the entire system by connecting to the management network port on any
server node.
If only one management network cable is connected to a node, restarting the node will interrupt the
management network of the server. The management network will be restored after the iBMC of the
node is restarted. If two or more management network cables are connected to any two nodes, this
problem can be avoided.
⚫
Server nodes are installed in the rear area and cables are connected to the rear panel,
facilitating maintenance.
⚫
X6000 V6 servers adopt the modular design. Drives, fan modules, server nodes, PSUs,
and OCP 3.0 network adapters are hot-swappable, greatly improving O&M efficiency.
Summary of Contents for X6000
Page 1: ......
