16
CN3200 Access Point - Installation Guide - G7604 - Release 3.3
Connect to the WiFi Access Point
1.
On theTool Bar at the top of the window, hover over
Network
and then click
WiFi
on the drop
down menu.
2.
On the
Wireless Overview
page, click
Scan.
All available CN1300 WiFi Access Points display in the
Associated Stations
section.
3.
Select a listed WiFi AP by SSID and then click
Join Network
.
4.
On the
Join Network: Settings
page, enter the passphrase for the WiFi AP in the
WPA passphrase
field.
5.
In the
Name of the new network
field, ensure that the value is
wwan
(lower case).
6.
In the
Create / Assign firewall-zone
section, click to select the
wan:
radio button,
and then click
Submit
.
7.
On the
Wireless Network: Client
page, click the
General Setup
tab in the
Device Configuration
section, select the required
Transmit Power
from the dropdown menu.
8.
Click the
Advanced Settings
tab of the
Device Configuration
section, and then select the desired
Country Code
from the dropdown menu.
9.
Continuing in the
Wireless Network: Client
page, scroll down to the
Interface Configuration
section, and then click the
Wireless Security
tab.
10.
Confirm that the displayed
Key
matches the
WPA passphrase
set in Step 4.
NOTE
If the
passphrase
is not visible, click the green reveal toggle icon to the right of the field to display it.
11.
Click
Save & Apply
.
The WiFi network is now available.
IMPORTANT
All other configuration settings must remain unchanged.
Only an advanced user should attempt to adjust any other settings.
