THANK YOU FOR YOUR PURCHASE
The XGAMING
®
Inc. team is proud to be chosen as the brains of your arcade project. With the high
end, commercial grade design of X-Arcade™ BYO Kit and our commitment to develop adapters for all
game systems, your project is sure to be a success.
IMPORTANT – READ BEFORE INSTALLATION
• The X-Arcade™ BYO Kit ships standard with the ability to work with a PC (PS/2 Port). Additional
adapters are available to connect the X-Arcade™ BYO Kit to a Mac or laptop (USB), and game
consoles such as the Playstation 2™, XBOX™, Dreamcast™, and GameCube™. The X-Arcade™
and/or other X-MS™ products are only compatible with XGAMING® branded, X-MS™ adapters.
When you purchase a new game system, like XBOX 2 or Playstation 3, be sure to visit:
www.
X-Arcade.com
for new adapter availability.
• As with any electronics, you should wear a grounding wristband to avoid damage to the PCB board
from static electricity.
• Although the X-Arcade™ BYO Kit uses low power throughout, you should avoid handling any
electronics while powered on.
• The X-Arcade™ BYO Kit plugs into a standard PS/2 keyboard port on a computer. If your keyboard
does not fit, you can purchase an off the shelf AT-PS/2 adapter. If you have problems using the
X-Arcade™ BYO Kit with your PS/2 keyboard port, you can get our USB Adapter at
www.-X-Arcade.com .
• For programming your X-Arcade™ BYO Kit, please pay close attention to the directions. Most
notably, when switching between MEMORY MODES you must press the Save/Load button 2 (TWO)
times to activate the MODE.
• When using your X-Arcade™ PCB kit with a game console, make sure to note the section on
Digital/Analog
,
which will alleviate many issues you may encounter.
• The LED light indicates that you have power to your X-Arcade™ BYO Kit. On the PC only, it is also
used for programming, see page 12 for more information.
• It’s important to remember to turn off your PC or game console before plugging or unplugging any
game controller, including yours using the X-Arcade™ BYO Kit.
X-ARCADE BYO KIT OVERVIEW
Included in this kit:
PC (PS/2) ADAPTER
SERIAL CABLE
X-ARCADE
TM
PCB BOARD
02
03
J10
J2
J3
J5
J6
J7
J9
J8
J4
WIRING HARNESS (NOT SHOWN)