background image

USB X-ADAPTER 

(Sold Separately)

The X-Arcade™ USB X-Adapter™ adds connectivity to other devices that cannot utilize the PS/2 
keyboard port, and adds versitility on a desktop PC as well. Some desktop PC's will require the USB 
X-Adapter™ if they do not supply enough power to the PS/2 keyboard ports as well. There are no 
drivers or software needed for the USB X-Adapter™, as they are built into operating system. When 
your X-Arcade™ BYO Kit is plugged into a computer using the USB X-Adapter™, the computer still 
thinks it is just a USB keyboard.
Keep in mind that you will still need to plug a PS/2 keyboard into the back of the X-Arcade™ BYO Kit 
in order to reprogram it. Once it is programmed the way you want it, you can unplug the keyboard and 
still use the modes you have programmed. 

NOTE:

 A standard off the shelf PS/2-USB adapter will NOT work with the X-Arcade™ BYO Kit.

COMMON USES FOR THE USB X-ADAPTER:

  •  If you do not wish to shut off your computer to connect or disconnect the X-Arcade™ BYO Kit   
    from the PS/2 keyboard port. This is especially true when you want to use the X-Arcade™ BYO  
    Kit on multiple devices. 
  •  If your desktop PC does not have a PS/2 keyboard port.
  •  If you do not wish to have a keyboard plugged into the X-Arcade™ BYO Kit. (Keep in mind that  
    you must still have a keyboard plugged into the back of the X-Arcade™ BYO Kit to program it.)
  •  If you have a laptop with no PS/2 keyboard port, or you do not wish to use an external  

 

    keyboard to use the X-Arcade™ BYO Kit  on your laptop.
  •  If you have a USB keyboard.
  •  If you have a wireless keyboard, or keyboard/mouse receiver.
  •  If you have a Mac. 
  •  If you want to use multiple X-Arcade™ BYO Kits on the same computer. You can connect one   
    X-Arcade™ BYO Kit into the PS/2 keyboard port, and plug a second one into the USB port. This  
    is the only way, as you cannot plug one X-Arcade™ BYO Kit into another (daisy-chain). You will  
    also need to reprogram the 2nd X-Arcade™ BYO Kit to different buttons directions. 

YOU MAY ALSO NEED OUR USB X-ADAPTER IF:

  •  If you notice that you cannot get a response by pressing one button, but if you press two buttons  
    at once it types a single letter.
  •  If your PC speaker beeps when you press buttons or directions on the X-Arcade™ BYO Kit.
  •  If your keyboard is double-typing letters or characters, or if the Caps Lock or Num Lock comes   
    on by themselves, Shift or Ctrl buttons get stuck, or menus are highlighted by themselves. 
  •  If you get "keyboard error" when starting your PC with the X-Arcade™ BYO Kit connected. 

08

09

           USB PORT

USING THE USB X-ADAPTER™ (SOLD SEPARATELY), YOU CAN PLUG IN OR 

UNPLUG THE X-ARCADE™ BYO KIT WITH THE PC/MAC ON OR OFF.  YOU CAN 

ALSO USE IT WITH OR WITHOUT A  PS/2 KEYBOARD PLUGGED INTO THE X-

ARCADE™ BYO KIT. YOU MUST HOWEVER STILL HAVE A KEYBOARD PLUGGED 

INTO THE BACK OF THE X-ARCADE™ BYO KIT FOR PROGRAMMING.  NO 

SPECIAL DRIVERS ARE NEEDED. 

1)

 Plug the black serial cable into the serial port on the X-Arcade™ BYO Kit. 

2)

 Plug the other end of the black serial cable into serial port on the USB X-Adapter™. 

3)

 Plug the other end of the USB X-Adapter™ into any available USB port on your PC or MAC. 

4) 

Optionally, you can plug a PS/2 keyboard into the X-Arcade™ BYO Kit.

5)  PLAY!

USB 

ADAPTER

COMPUTER

USB

0 1

J

2 J

3 J

5 J

6 J

7 J

9 J

8 J

4 J

BYO PCB BOARD

MAC

LAPTOP

Summary of Contents for X-Arcade BYO












Reviews: