HM-E200 User Manual
14
Please use at a room temperature if you want to set the density to ‘3 Special’.
Some type of the paper are not suitable for use in low temperature environment.
Press the MODE button once to switch the menu item--Standby Time.
→
Press the FEED button once to get into the menu.
Display:
Standby Time:
[0010-9999(Sec)]
0060
→
Press the FEED button twice to move cursor(“-”), then press the MODE button twice to input the
number: 8, finally press and hold FEED button to confirm the new setting and return to the previous
menu.
(The standby time has set to 80 seconds)
0060(Sec)
→
0080(Sec)
When set the parameter to 0000, the standby time becomes invalid.
If set the parameter to 001~ 009, it will return to the previous setting, so do not set it.
Press the MODE button twice to switch the menu item--Power Off Time.
→
Press the FEED button once to get into the menu.
Display:
Power Off Time:
[0000-9999(Min)]
0120
→
Press the MODE button once to input the number on : 1, then press and hold FEED button to confirm
the new setting and return to previous menu.
(The auto off time has set to 11200 minutes)
0120(Min)
→
1120(Min)
When set the parameter to 0000, the auto off time becomes invalid.
Press the MODE button 3 times to switch the menu item--Paper Type.
→
Press the FEED button once to get into the menu.
Display:
0-Receipt
1-BM(L-Back)
2-BM(L-Front)
3-BM(R-Back)
4-BM(R-Front)
5-Label
0
