HM-E200 User Manual
15
→
Press the MODE button twice to input the number:2, then press and hold FEED button to confirm the
new setting and return to the previous menu.
(The paper type has set to BM(L-Front))
0(Receipt)
→
2(BM(L-Front))
Press the MODE button 4 times to switch the menu item--Language.
→
Press the FEED button once to get into the menu.
Display:
Select Language
0-EN 1-CH
0
Press the MODE button 5 times to switch the menu item--Factory Reset.
→
Press the FEED button once to get into the menu.
Display:
0-Cancel
1-OK
0
→
When the setting does not need to be reset, press and hold FEED button to return to the previous
menu.
Press the MODE button 6 times to switch the menu item--Prior Menu.
→
Press the FEED button once to return to the prior menu.
Display:
1 Self Test
2 System Setting
3 Exit Menu
Press the FEED button once to enter the menu item--Self Test
Display:
1 Print
2 Calibrate
3 Hex Dump Mode
4 Prior Menu
→
Press the FEED button once, you will see present “Press Feed To Print” in the LCD, press FEED button,
the new settings will be printed.
If the settings were not configured correctly, follow the above procedure to configure the settings again.
