HM-E300 User Manual
15
Press the MODE button 4 times to switch the menu item--Language.
→
Press the FEED button once to get into the menu.
Display:
Language
0-EN 1-CH
0
Press the MODE button 5 times to switch the menu item--Factory Reset.
→
Press the FEED button once to get into the menu.
Display:
0-N
1-Y
0
→
When the setting does not need to be reset, press and hold FEED button to return to the previous
menu.
Press the MODE button 6 times to switch the menu item--Prior Menu.
→
Press the FEED button once to return to the prior menu.
Display:
1 Self Test
2 System Setting
3 Exit Menu
Press the FEED button once to enter the menu item--Self Test
Display:
1 Print
2 MSR
3 MSR Key Inject
4 Hex Dump Mode
5 Previous Menu
→
Press the FEED button once, you will see present “Press Feed To Print” in the LCD, press FEED button,
the new settings will be printed.
If the settings were not configured correctly, follow the above procedure to configure the settings again.
