HTP58B User Manual
Rev.1.1
12
4.2.2 Power Specification
The power of HTP58B is 12V
2A.
4.3 Cash Drawer Interface
4.3.1 Connecting Cash Drawer
4.3.2 Cash Drawer Specification
Pin No.
Signal
Function
1
FG
Frame Ground
2
DRAWER 1
Drawer kick-out drive
signal 1
3
DRSW
Drawer open/close signal
4
VDR
Drawer driving source
5
DRAWER 2
Drawer kick-out drive
signal 2
6
GND
GND
Note
：
Strictly prohibit to hot plug the plug.
When arranging the line of communication, you have to avoid paralleling with the
strong current.
you have to use the shielded communication line.
1) Confirm the printer power is turned off.
2) Insert the cash drawer cable into the cash drawer
connector on the back of the printer.
Caution:
Cash drawer interface can be connected only with a
cash drawer device (Do not connect a telephone line
and so on).
