iT4 Series User Manual
Rev.1.0
2
Important Safety Instructions
Before using the appliance, please carefully read the following safety regulations in order to prevent any hazard
or material damage.
1. Safety warning
Warnings: The print head will become very hot during printing; avoid contact with the print head after
printing has finished.
Warnings: Do not touch the printer head and connector in case static damage the printer head.
2. Instructions
Warnings: Violating following instructions can cause serious injury or death.
1) Do not plug several products in one multiperture outlet.
• This can provoke over-heating and a fire.
• If the plug is wet or dirty, dry or wipe it before usage.
• If the plug does not fit perfectly with the outlet, do not plug in.
• Be sure to use only standardized multiperture outlet.
2) You must use the supplied adapter.
• It is dangerous to use other adapters.
3) Do not pull the cable to unplug.
• This can damage the cable, which is the origin of a fire or a breakdown of the printer.
4) Do not plug in or unplug with your wet hands .
• You can be electrocuted.
5) Do not bend the cable by force or leave it under any heavy object.
• A damaged cable can cause a fire.
Summary of Contents for iT4P
