Rev. 1.3
19
3.5 Operation Panel
Button Operate
Power On
Turn on the power switch at the rear, the printer is on and LED indicator is blue.
Power Off
Turn off the power switch at the rear, the printer is off.
FEED Button
1.
When the printer is on, press this button, printer will automatically feed a label under
“Label Mode”; the printer will feed a fixed distance under “Continuous Mode”;
2.
When the printer is printing, press this button, current printing job pauses, and the LED
indicator is white(tri-color blue, green, red); press this button again, the printing
continues.
LED Indicators and Status:
LED Indicators
Printer’s Status
Color
Status
Blue Green Red
Shown
Color
√
-
-
Blue
On
Printer is ready
√
-
Blue
Flash
Do not pass RAM test
√
-
√
Pink
On
TPH overheat
√
-
√
Pink
Flash
The ribbon is used up
-
-
√
Red
On
The printer cover is not close properly
-
-
√
Red
Flash
Out of paper
-
√
√
Yellow
On
Printer’s voltage is too low or too high
-
√
√
Yellow
Flash
Paper jams
√
√
√
White
On
Printing pause
