13
3.5 Printing Test
3.5.1 Print Self-test Page
When initially install printer or any problems happen to printer, you can make
a self-test page to check status of firmware version, printer parameter setting,
printing quality and related setting information of external equipments etc.
Once you confirm printer does not have any problems after self-testing,
please check other devices or software. Self-testing function is working
independently with other devices and software.
Self-test page printing methods as follow:
1. Make sure printer is power linked, and paper roll installed properly.
2. Make sure is power off, and the cover is closed properly.
3. Hold the paper feed button, then press the power button; when printer is
power on please loosen the feed button.
3.5.2 Use Windows Driver Programs to Print
1. Install Windows driver, refer to “RP4xx Windows Driver manual” to finish
driver installation.
2. Windows driver "port" is set to printer corresponding interface.
3. Use “print self-test page” function of Window driver to make self-testing.
3.6 Label Study
Cautions
: In the following cases, user better study some label positioning
knowledge, as to better locate label position:
First time to install and use printer;
Use printer after first senor clearance;
Re-use printer after a very long time;
Change new type of paper rolls;
During printing, printer can not recognize mark effectively.