6
7
Care & Maintenance Plan
The expected service life for Xiaomi electric scooters is 3 years, and the expected mileage is 10000 km. When the scooter
is used for more than 3 years or the total riding mileage exceeds 10000 km, it is recommended to have it serviced at an
authorized repairer. The following table shows the recommended maintenance items and frequencies.
Scooter Maintenance Schedule (Recommended):
Maintaining the scooter regularly can help keep the scooter neat and in good condition, avoid safety hazards, minimize
breakdowns, slow down the deterioration of the scooter, and extend the scooter's service life.
Item
Service
Object
Actions
Every
month
Every 3
months
Every 500 km/
6 months
Every 1000 km/
1 year
Every 10000 km/
3 years
Tires
Tire Pressure
Inflate the tire until its pressure
reaches 45–50 psi.
√
√
√
√
Tire Tread Wear
Check whether the tire is cracked,
deformed, worn, etc.
√
√
√
Screws
Handlebar
Assembly
Screws
Tighten the screw that connects the
handlebar assembly with the stem
assembly (with the recommended
torque of 3.5 ± 0.2 N·m).
√
√
√
√
Tighten the accelerator screw (with
the recommended torque of
2.1 ± 0.1 N·m).
√
√
Tighten the brake lever screw (with
the recommended torque of
3.5 ± 0.2 N·m).
Disc Brake
Caliper
Tighten the screw that fixes the disc
brake caliper (with the recommended
torque of 7.0 ± 0.5 N·m).
√
√
√
Item
Service
Object
Actions
Every
month
Every 3
months
Every 500 km/
6 months
Every 1000 km/
1 year
Every 10000 km/
3 years
Functions
Brake
Adjustment
Before adjusting, get yourself a 10 mm
wrench (prepared by the user) and make
sure the scooter is turned off and not being
charged.
During adjusting, pull the end of the brake
cable to make the cable tight.
Notes:
· If the brake is too tight, use the tool
to loosen the screw by turning it
counterclockwise, pull the disc brake rocker
arm outwards, and then tighten the screw. If
the brake is too loose, use the tool to loosen
the screw by turning it counterclockwise,
push the disc brake rocker arm forwards, and
then tighten the screw.
· The scooter is tested under the conditions
of a load of 75 kg, and running at 25 km/h
with the braking distance within 9.48 m.
√
√
√
Disc Brake
Rotate the rear wheel to check whether the
disc brake and the caliper remain parallel
with each other, and make sure they are not
deformed, rub against each other, or make
unusual sounds.
√
√
√
Charging
Charge the scooter at a suitable temperature.
The indicator on the battery charger is red
when the scooter is charging, and turns
green when the scooter is fully charged. The
control panel will show the charging status
simultaneously during charging.
√
√
√
Steering
Turn the handlebar 60° to the left and right
to make sure the turning angle is correct
and the steering is free from resistance and
stagnation.
√
√
Important
Components
Battery
Assembly
Fully charge the scooter before leaving it
unused for a long time, and turn it on to
charge every 60 days.
√