1
2
1
2
3
4
Folding and Carrying
Align the bell and the buckle and hook them.
Hold the handlebar stem, turn it counterclockwise to open
the safety hook and open the quick release lever.
Hold the handlebar stem with either one hand or both hands
to carry.
Disengage the bell lever from the buckle on
the mudguard.
Open
Brake Cable
Valve Cap
Unscrew the valve cap.
Connect the extension nozzle to the
tire valve stem.
Connect the pump to inflate the tire.
Before adjustment, make sure the scooter is powered off and not charging.
If the brake is too tight/loose, use the 4 mm Allen key to loosen the screw on the caliper. Then slightly adjust the brake line (decrease/in-
crease the exposed lenght), and tighten the screw again.
Adjusting the Disc Brake
Tire Valve Stem
