Component parts
1. Complete mounting x1
Front
Clasp
Front Belt
Rear
Buckle
Rear Belt
Fasteners (buttons)
Slider
Retaining
hook
Complete
fastening
Anti-slip coating
2. Leather case x1
Before tightening the belts to the limit, use a special leather case
to hide the excess length of the belts. See the 5th step in the
section «Installing the device».
Front side
Backside
3. Power cable x1
(4.5m)
Installing the device
1. Installing the device
When installing the device, the button and
indicator should be directed to the interior
of the car. Fix the device with the help of
a complete fixing, with the air outlet holes
pointing upwards.
2. Lock the device
Spread the belts, fix with them air cleaner
by fastening the fasteners.
3. Installing the complete mounting
Install the complete mounting on the rear
center head restraint. It is not recommended
to install the mount on the front head
restraint (if the installation of the device is not
possible with the rear head restraint, you can
purchase additional components for installing
the air cleaner). Thread the complete
mounting belts through the head restraint and
fasten the fasteners.
4. Fixing the complete mounting
Tighten the attachment belts securely so
that there is no free space between the
device and the head restraint, so that the
air cleaner will be securely fixed. Before
tightening the belts to the limit, use a
special leather case to hide the excess
length of the belts.
