03
Connecting
Connecting the earphones to a new device
Place the earphones into the charging case, then press and hold
the function button for 2 seconds. The charging case indicator light
will start blinking, indicating that the earphones are waiting to be
connected.
Enable the device's Bluetooth, then locate and connect to "Mi True
Wireless Earphones 2". If a passcode is requested, enter "0000".
Connecting the earphones with a Mi phone
Place the earphones into the charging case and close its lid. Make
sure the Bluetooth function is enabled on your Mi phone. Hold your
phone close to the charging case, then open the case's lid. Follow
the on-screen instructions of the phone to connect to the
earphones.
Note: The feature to quickly connect is currently only supported by
some Mi phones, please update your Mi phone to the latest stable
version.
Connecting to two devices
Place one of the earphones into the charging case, then press and
hold the function button for 2 seconds. Use device A to search for
and connect to the earphone.
After the first earphone is connected to device A, take the earphone
out of the charging case. Now place the second earphone into the
charging case and press and hold the function button for 2
seconds. Use device B to search for and connect to the earphone.
This will connect each earphone to a separate device.
Note: Before using this function, the connection history of each
earphone needs to be cleared.
Connection interrupted
When a device's Bluetooth is disabled, or if the earphones are out of
range, the earphones will automatically enter awaiting connection
mode. If the earphones remain disconnected to a device for 10
minutes, they will enter sleep mode. Wearing the earphones again
will wake them up and enter awaiting connection mode.
Automatic connection
While the earphones are in the charging case, opening the case will
cause the earphones to automatically connect to the most recently
used Bluetooth device. If no connection history is detected, or if the
earphones cannot successfully connect to any Bluetooth device, the
earphones will automatically enter the awaiting connection mode.
Note: If the earphones cannot automatically connect to a device,
you will need to manually connect the earphones to the desired
device via the device's Bluetooth settings.
Due to the connection characteristics of the Bluetooth signal, in
dense environments with 2.4 GHz electromagnetic signal
interferences, there may be occasional disconnects or no sound.
Clearing connection history
Place the earphones into the charging case.
Press and hold the function button on the charging case for more
than 10 seconds. Once the indicator alternately blinks red and
●
1.
2.
●
●
1.
2.
●
●
●
1.