Step by step installation
Installing filter cartridges
Removing and installing adapters mixer
Remove filter cartridges from packaging
Insert first filter cartridge to corresponding well in such
a manner that the lever of cartridge pointing to 9:00
(Figure 2)
3 points that
indicate correct
position of the filter
cartridge:
A round point, directed at the lock icon (Figure 2)
Slightly press down filter cartridge and rotate it counter-
clockwise by 90%.
Cartridge’s pen points to 12:00 pm (Figure 2)
Surface of filter cartridge is at the same level with
surface of the base unit (Figure 3)
In turn, install remaining cartridges 2,3,4 in the
same way (Figure 4)
After installation, you must necessarily within 10
minutes run water through purifier
Note: You need to get rid of water, to rinse filter cartridges and tubes. You may see a grayish
water or water with bubbles, it is normal to drain water until it is clear. When you first use it is
necessary to wait a relatively long time, but please be patient.
Aerator
Aerator
What is an aerator?
Most faucets in kitchen have tips (aerators) that are in front, and which
can be unscrewed. They are helping with good mixing of water with air,
so you can even see the effect of foaming.
Note
: In some faucets in bathroom or older models of faucets do not
have an aerator.
Tools Required: small wrench
Wrench is in box with accessories. This tool is designed so you can
easily unscrew aerator and screw in filter adapter.
XIAOMI-MI.COM
