Planning of cleaning
Using the mobile app, you can schedule cleaning for some time, and the unit will
automatically start cleaning at a selected time, and after automatically return to
base to recharge.
Wi-Fi Reset
When, for hardware reasons, or if you have forgotten Wi-Fi password, etc., you
can not connect and operate the device, using a mobile phone, open an upper
hinged cover, and then you will see a Wi-Fi status indicator, simultaneously
press and hold the buttons O and «Home», at this time you will hear a voice
command «Reset Wi-Fi». Wait, till indicator flashes slowly again, restart was
successful.
Cleaning algorithm
With the mobile app, you can choose a quiet, normal and energetic cleaning
mode. By default, the standard mode.
DND mode
In «Do Not Disturb» mode the instrument can not continue to clean and speech
means informs about it. Frequency of ring indicator flashing reduced. «Do
Not Disturb» mode configured to 22.00 to 08.00 by default. With the mobile
application mode «Do not disturb» You can enable or reprogram his time ..
Virtual barrier
This is a non-standard addition, can be purchased at www.mi.com
Virtual barrier can be used to limit the location of undesirable areas for the device, for
example, dangerous changes in levels, steps, places where it is possible jamming
device.
Attention! Very carefully and firmly attach barriers, that they do not come unstuck,
otherwise their application will be ineffective.
Virtual barrier
Attention! Place virtual horizontal barriers on the way of the device.
