XL5155J Digital Counter
Power Source DC5V
FEATURES:
Power supply DC5V
Ultra-bright LED display
15.00mm digit height
Low cost
High accuracy
Easy to install, snap-in/mount in panel
Ideal for auto, boat, industrial, commercial & domestic uses
OPERATION SPECIFICATIONS:
Power Source
DC5V±10%
（
150 mA
）
Maximum Count
99999 (5 digits)
Count Frequency
≤
10kHz
Accuracy ±0.01%+1digit
Operating Temperature
0 to 55
℃
Storage Temperature
-10 to +80
℃
Humidity 20%-80%
Weight 50-55g
Dimension
W79 x H42.5 x D25.5mm
Installation size
76 x 39 mm
Mounting Method
Snap-in
XL5155J Digital Counter
Power Source DC5V
FEATURES:
Power supply DC5V
Ultra-bright LED display
15.00mm digit height
Low cost
High accuracy
Easy to install, snap-in/mount in panel
Ideal for auto, boat, industrial, commercial & domestic uses
OPERATION SPECIFICATIONS:
Power Source
DC5V±10%
（
150 mA
）
Maximum Count
99999 (5 digits)
Count Frequency
≤
10kHz
Accuracy ±0.01%+1digit
Operating Temperature
0 to 55
℃
Storage Temperature
-10 to +80
℃
Humidity 20%-80%
Weight 50-55g
Dimension
W79 x H42.5 x D25.5mm
Installation size
76 x 39 mm
Mounting Method
Snap-in
CONNECTION DIAGRAM:
View of PINs with screen facing upwards.
PIN 1 Hi-voltage impulse signal input
PIN 2 Lo-voltage impulse signal input
[ Start count when PIN1, 2 shorted]
PIN 3 Blank
PIN 4 Zero clearing (Short circuit PIN2 with PIN4)
PIN 5, 6, 7, 8 Blank
PIN 9
DC5V- Power supply
PIN 10
DC5V+ Power supply
Attention:
1.
Power supply must be correct polarity, can’t reverse
anode & cathode.
2.
The voltage impulse range between 3.5VDC to 5VDC
3.
Turn on the power source before inputting signals;
Cut off the signals before Turn off the power supply.
4.
Avoiding shake strongly when the meter working.
CONNECTION DIAGRAM:
View of PINs with screen facing upwards.
PIN 1 Hi-voltage impulse signal input
PIN 2 Lo-voltage impulse signal input
[ Start count when PIN1, 2 shorted]
PIN 3 Blank
PIN 4 Zero clearing (Short circuit PIN2 with PIN4)
PIN 5, 6, 7, 8 Blank
PIN 9
DC5V- Power supply
PIN 10
DC5V+ Power supply
Attention:
1.
Power supply must be correct polarity, can’t reverse
anode & cathode.
2.
The voltage impulse range between 3.5VDC to 5VDC
3.
Turn on the power source before inputting signals;
Cut off the signals before Turn off the power supply.
4.
Avoiding shake strongly when the meter working.
10 9 8 7 6 5 4 3 2 1
10 9 8 7 6 5 4 3 2 1
