XA Series User's manual - Page 21
7.6 Security lock and unlock
PASSWORD:
The password is 4 characters in length. The factory default of a new unit
does not require a password.
The device can be protected for unauthorized parameter and /or system
abuse. The securtity settings can be controlled and stored in the device with
the XConsole GUI only.
When the correct password is entered in the device all the locks are
disabled. After reientering the password or powercycling the device, the
locks are automatically enabled again.
7.7 Factory
Settings
CURRENT:
This resets all the current parameters back to factory default settings only,
while stored presets and system settings stay untouched.
7.8 ISO
Settings
This Internal System Optimizer reduces ground floor noise if no signal is
present.
If unwanted
Noise Gate effects are audible on low sound levels it can be
switched to bypass mode.
SYSTEM Secure
PASSWORD:____
SYSTEM Reset
CURRENT:Yes
SYSTEM ISO
THRESHOLD:102
