5
9.4 Don’t load the cargo at a high speed.
9.5 Do not overload the forks. Overloading could keep the hand pallet truck with scale
from working normally.
9.6 The gravity center of cargo should be in the middle of truck forks. The offset of cargo
could make the truck out of balance.
9.7 Non-palletized cargo should not be weighed by this type of hand pallet truck with scale.
9.8 Do not put the cargo on the truck forks for a long time.
9.9 When hand pallet truck with scale does not work, make sure that the truck forks is on
the lowest position and the power should be cut off.
9.10 Do not load people and let them stand on the truck forks and slide. It is strictly
forbidden that put any part of body below the cargo.
9.11 The hand pallet truck with scale should be operated on flat and hard ground and don’t
use it on the slope!
9.12 Do not use the hand pallet truck with scale in environment exposed to rain and sun.
9.13 Do not operate the unspecified position.
9.14 Do not try to repair the hand pallet truck with scale unless you have been trained.
9.15 The power used for the printer is free-maintenance charged battery. Once the battery
is damaged or has been used up, it should be carried to recycle bins and forbid
disposing anywhere.
9.16 This type of hand pallet truck with scale is not suitable for trade settlement.
10. The requirements of hoisting and transportation
10.1 See Fig 10, both of hand grip and steelyard stand should be detached and packed in
another way before hoisting and transportation.
10.2 The hand grip and steelyard stand should be fixed stably in case of gliding and
damages. And then they are packed in a case and transported by forklift truck or
hoisting apparatus.
