Welcome to choose “XILIN” Fork Reach Electric Stacker.
We hope our fork reach electric stacker will bring great
convenience to your work.
Please read the manual carefully before operation.
This manual is a common manual. We reserve the right to modify technology of the
reach electric stacker. If there is anything in the manual that is not consistent with the
actual truck, the actual truck should be considered correct and the manual is only for
reference.
Warning!
According to ISO 3691:1980 “Safety Norm of Motor Industrial Vehicles”, Load and lifting height of our CQDH fork reach
electric stacker are stipulated as follows:
When the lifting height of CQDH stacker is below 3000mm (including 3000mm), the maximum bearing capacity is the
rated bearing capacity. Overload is prohibited.
When the lifting height of CQDH stacker is above 3000mm (excluding 3000mm), the bearing capacity is less than the
rated bearing capacity. And you can take height curve as a reference.
When the center of gravity is not in accordance with standards, you can take load center curve as a reference.
Fig. 1
Note:
When the lifting height of the forks exceeds 500mm, the stacker must travel at the lowest speed and the continual travel
distance must not exceed 2m. Inconformity with the regulation may result in:
a. Injury of the driver or other people
b. Damage of the stacker and goods
