4
Alveo Programming Cable User Guide
UG1377 (v2019.
1
) September 17, 2019
Chapter 1: Introduction
Overview
The Alveo™ Programming Cable provides development access for debug
-port enabled Alveo Cards
allowing the card to be programmed. The Alveo programming cable consists of a programming
module, ribbon cable and USB cable. Debug-port enabled Alveo cards have a 2x15-pin connector,
which connects to the programming module via the ribbon cable. The programming module connects
to the host computer via micro-USB, which also provides power. This setup is shown in
The following cards include a debug-port and support the Alveo Programming Cable:
•
U50/U50DD
