background image

8

www.xilinx.com

KC705 Getting Started Guide

UG913 (v4.1.1) March 7, 2014

Chapter 1:

Getting Started with the Kintex-7 FPGA KC705 Embedded Kit

What’s Available Online

License for Vivado Design Suite:

Licensing Solution Center

Xilinx Licensing FAQ

Embedded kit home page with documentation and reference designs:

Kintex-7 FPGA Embedded Kit

Technical Support

Getting Started with the Video Demonstration

This Kintex-7 FPGA embedded kit comes with a video demonstration available on the 
embedded kit home page. This demonstration can be run before installing any additional 
tools to get an overview of the features of the KC705 evaluation board using a MicroBlaze 
processor subsystem in the Kintex-7 (XC7K325T-FF900-2) FPGA.

Processor System Used for the Video Demonstration

The provided video demonstration uses a pre-built Kintex-7 FPGA design (

Figure 1-1

with these features:

MicroBlaze processor

External DDR3 SDRAM interface

External flash memory interface

On-chip memory (block RAM)

Integrated Tri-Mode Ethernet MAC

UART (connected from the KC705 board via the USB-UART connector)

Interrupt controller (Intc) and timer

GPIO (LCD, LEDs, buttons, switches, and rotary)

Software-configurable XADC block

Send Feedback

Summary of Contents for Kintex-7 FPGA KC705






























Reviews: