PN 0402246-01
Page 9 of 17
Solaris
Install CD
1.
Insert the EDK CD into your CD drive.
2.
Change directory to the CD home.
3.
Run
install_solaris.csh
.
4.
Follow the on-screen directions to complete installation.
Set Environment
•
Source your ISE environment script. The EDK script requires that ISE be setup first.
•
Source the environment setup script:
source <edk_install_dir>/setup.csh
Note:
The setup file modifies only the current shell’s environment to run EDK. It must be re-
sourced if you open a new shell.
Apply Service Pack
1.
Unzip the service pack into your $XILINX_EDK directory. Replace all files when prompted.
(The service pack was downloaded during “Step 3: Download ML300 Reference Design, ISE /
EDK Service Packs, and ChipScope Pro Software”.)
Verify Installation
1.
Open a shell and source the ISE and EDK environment scripts.
2.
Within the shell, invoke Xilinx Platform Studio (XPS) to obtain its usage information:
xps -help
3.
Check that the displayed version matches the version you installed. (One of the first few lines
contains the EDK release version, e.g. “Xilinx EDK 6.2”.)
www.BDTIC.com/XILINX
