Mechanical - dimensions and mounting
Rear side mounting, heatsink notes
1
2
3
4
1
2
3
4
5
6
1
2
3
4
Four mounting points M4 on the heatsink.
Four mounting points M3 on the rear panel.
Y
Max. depth of the screws is 6mm.
Y
Max. depth of the screws is 6mm.
Y
Max. screws torque is 1.3 N-m @ 5.5mm screw depth
Y
Max. screws torque is 0.5 N-m @ 5.5mm screw depth
Bottom View with heatsink attached
Rear View without heatsink
Dimensions & Mounting points positions
Bottom View with heatsink attached
Mounting points positions
Heatsink use, installation and precautions.
Continuos operation above 45°C ambient temperature at full
CPU load requires use of heatsink.
Heatsink kit comes with the heatsink itself, four M3x8 mount-
ing screws and a temperature conductive gap filler already
placed on the heatsink and protected by transparent plastic
film against contamination and damage.
Installation requires removal of the protection film and simple
attachment of the heatsink by four screws to the back panel of
the device.
Y
Max. screws torque is 0.5 N-m.
www.ximea.com
CURRERA R-Series - Hardware Guide Q1 2011
Page 14
