xiJ - Technical Manual Version 0.06
72
6.3.8.
Mechanical loads
Avoid excessive shaking, throwing, dropping or any kind of mishandling of the device.
6.3.9.
Camera / lens cleaning
Please follow instructions described below.
•
Use only optical quality tissue / cloth (dry cotton) a standard camera lens cleaning kit, if you must clean a lens or filter. Do
not apply excessive force.
•
Use only optics cleaner (e.g. 60% ethyl alcohol, 40% ether). Never use aggressive cleaners like gasoline or spirits. Such
cleaners may destroy the surface.
•
Do not use compressed air.
6.3.10.
Protect against static discharge (ESD)
Image sensors and the PCB are easily damaged by static discharge (ESD).
•
Please use anti-static gloves, clothes and materials. Also use conductive shoes.
•
Wear an ESD protection wrist strap.
•
Install a conductive mat on the floor and / or working table to prevent the generation of static electricity.
6.4.
Warranty
In addition to the provisions of Article VIII of the Standard Terms & Conditions of XIMEA GmbH (see
) the following additions and specifications apply:
XIMEA warrants to the Original Purchaser that the Camera provided is guaranteed to be free from material and manufacturing
defects for a period of two years. Should a unit fail during this period, XIMEA will, at its option, repair or replace the damaged
unit. Repaired or replaced Products are covered for the remainder of the original Product warranty period.
Warranty is void if any proprietary labeling is removed. This warranty does not apply to units that, after being examined by
XIMEA, have been found to have failed due to customer abuse, mishandling, alteration, improper installation or negligence. If
the original camera module is housed within a case, removing the case for any purpose voids this warranty. This warranty does
not apply to damage to any part of the optical path resulting from removal or replacement of the protective glass or filter over
the camera, such as scratched glass or sensor damage. If the camera is disassembled, reworked or repaired by anyone other
than a recommended service person, XIMEA or its suppliers will take no responsibility for the subsequent performance or quality
of the camera.
XIMEA expressly disclaims and excludes all other warranties, express, implied and statutory, including, but without limitation,
warranty of merchantability and fitness for a particular application or purpose. In no event shall XIMEA be liable to the Original
Purchaser or any third party for direct, indirect, incidental, consequential, special or accidental damages, including without
limitation damages for business interruption, loss of profits, revenue, data or bodily injury or death except in case of willful
misconduct by XIMEA or employees of XIMEA.
6.5.
Disclaimer of Warranty
In addition to the provisions of Article XII of the Standard Terms & Conditions of XIMEA GmbH (see
) the following apply:
Although XIMEA has taken care to ensure the accuracy of the information contained herein it accepts no responsibility for the
consequences of any use thereof and also reserves the right to change the specification of goods without notice.
XIMEA does not assume any liability for damage that is the result of improper use of its products or failure to comply with the
operating manuals or the applicable rules and regulations.
